İnceleme Makalesi
BibTex RIS Kaynak Göster

A MINI REVIEW OF THE STUDIES ON MASSIVE WOOD MATERIALS MACHINING AND SURFACE QUALITY

Yıl 2021, Cilt: 3 Sayı: 2, 48 - 59, 25.12.2021

Sait Dündar Sofuoğlu

Öz

The purpose of this study was to analyze and evaluate the studies on massive wood materials machining and surface quality. It has been observed that these studies were performed in order to determine optimal wood machining parameters for obtaining the best surface quality on various wood species. A variety of visual techniques and surface roughness measurement methods are used and studied to be developed in order to determine surface quality. Determining the most optimal processing conditions for all wood species used in the wood machining industry will be useful in terms of productivity, quality, and cost and so on.

Anahtar Kelimeler

Wood materials machining quality surface quality

Kaynakça

  • Aras R., Budakci M. and Ozisik O. (2007). The effect of wood turning techniques on surface roughness of wood material. Journal of Polytechnic, 10(3), 325-330.
  • Aslandogan C. (2005). Research on determination of surface roughness of Crimean pine (Pinus nigra Arnold) wood. Master's thesis, Hacettepe University, The Institute of Sciences, Ankara, Turkey

Yıl 2021, Cilt: 3 Sayı: 2, 48 - 59, 25.12.2021

Sait Dündar Sofuoğlu

Öz

Kaynakça

  • Aras R., Budakci M. and Ozisik O. (2007). The effect of wood turning techniques on surface roughness of wood material. Journal of Polytechnic, 10(3), 325-330.
  • Aslandogan C. (2005). Research on determination of surface roughness of Crimean pine (Pinus nigra Arnold) wood. Master's thesis, Hacettepe University, The Institute of Sciences, Ankara, Turkey
Toplam 2 adet kaynakça vardır.

Ayrıntılar

Birincil Dil İngilizce
Konular Biyomateryaller
Bölüm Review Articles
Yazarlar

Sait Dündar Sofuoğlu 0000-0002-1847-6985

Yayımlanma Tarihi 25 Aralık 2021
Kabul Tarihi 24 Kasım 2021
Yayımlandığı Sayı Yıl 2021 Cilt: 3 Sayı: 2

Kaynak Göster

APA Sofuoğlu, S. D. (2021). A MINI REVIEW OF THE STUDIES ON MASSIVE WOOD MATERIALS MACHINING AND SURFACE QUALITY. Wood Industry and Engineering, 3(2), 48-59.
AMA Sofuoğlu SD. A MINI REVIEW OF THE STUDIES ON MASSIVE WOOD MATERIALS MACHINING AND SURFACE QUALITY. WI&E. Aralık 2021;3(2):48-59.
Chicago Sofuoğlu, Sait Dündar. “A MINI REVIEW OF THE STUDIES ON MASSIVE WOOD MATERIALS MACHINING AND SURFACE QUALITY”. Wood Industry and Engineering 3, sy. 2 (Aralık 2021): 48-59.
EndNote Sofuoğlu SD (01 Aralık 2021) A MINI REVIEW OF THE STUDIES ON MASSIVE WOOD MATERIALS MACHINING AND SURFACE QUALITY. Wood Industry and Engineering 3 2 48–59.
IEEE S. D. Sofuoğlu, “A MINI REVIEW OF THE STUDIES ON MASSIVE WOOD MATERIALS MACHINING AND SURFACE QUALITY”, WI&E, c. 3, sy. 2, ss. 48–59, 2021.
ISNAD Sofuoğlu, Sait Dündar. “A MINI REVIEW OF THE STUDIES ON MASSIVE WOOD MATERIALS MACHINING AND SURFACE QUALITY”. Wood Industry and Engineering 3/2 (Aralık 2021), 48-59.
JAMA Sofuoğlu SD. A MINI REVIEW OF THE STUDIES ON MASSIVE WOOD MATERIALS MACHINING AND SURFACE QUALITY. WI&E. 2021;3:48–59.
MLA Sofuoğlu, Sait Dündar. “A MINI REVIEW OF THE STUDIES ON MASSIVE WOOD MATERIALS MACHINING AND SURFACE QUALITY”. Wood Industry and Engineering, c. 3, sy. 2, 2021, ss. 48-59.
Vancouver Sofuoğlu SD. A MINI REVIEW OF THE STUDIES ON MASSIVE WOOD MATERIALS MACHINING AND SURFACE QUALITY. WI&E. 2021;3(2):48-59.
 Kapak Resmi İndir

Wood Industry and Engineering Journal
 Correspondence: Karadeniz Technical University, Faculty of Forestry, Department of Forest Industry Engineering, Kanuni Campus, 61080, Trabzon / TURKEY
Contact E-mail: engin_gezer@yahoo.com (Editor - Assoc. Prof. Dr. Engin Derya GEZER),   iaydin@ktu.edu.tr  (Co-Editor - Prof. Dr. Ismail AYDIN)
Phone: +90 (462) 377 1532,  Fax: +90 (462) 325 7499