Öz
Kaynakça
- [1] Bunshah, R. F., C. Weissmantel (2001). Handbook of Hard Coatings: Deposition Technologies, Properties and Applications. Noyes Publications, Norwich, New York.
- [2] Bunshah, R.F. (Ed.) (1994). Handbook of Deposition Technologies for Films and Coatings: Science, Technology, and Applications. William Andrew, LLC Norwich, New York.
- [3] Mattox D.M. (2010). Handbook of Physical Vapor Deposition (PVD) Processing. William Andrew, LLC Norwich, New York.
- [4] Bunshatta, R.F. (1980). High Rate Physical Vapour Deposition Processes, Agard Lecture Series No: 106, Material Coating Techniques. Hardford House, London.
- [5] Totten, G. E. (Ed.) (1992). ASM Handbook, Volume 18: Friction, Lubrication, and Wear Technology. ASM International, Cleveland.
- [6] Gerth, J., Wiklund, U. (2008). The İnfluence of Metallic Interlayers on the Adhesion of PVD TiN Coatings on High-Speed Steel. Wear, 264(9-10), 885-892, https://doi.org/10.1016/j.wear.2006.11.053.
- [7] Aihua, L., Jianxin, D., Haibing, C., Yangyang, Jun, C. Z. (2012). Friction and Wear Properties of TiN, TiAlN, AlTiN and CrAlN PVD Nitride Coatings. International Journal of Refractory Metals and Hard Materials, 31, 82-88. https://doi.org/10.1016/j.ijrmhm.2011.09.010.
- [8] Chavda, M.R., Dave, D.P., Chauhan, K.V., Rawal, S.K. (2016). Tribological characterization of TiN coatings prepared by sputtering. Procedia Technology, 23, 36-41. https://doi.org/10.1063/1.5032487.
- [9] Wang, L., Northwood, D.O., Nie, X., Housden, J., Spain, E., Leyland, A., Matthews, A. (2010). Corrosion properties and contact resistance of TiN, TiAlN and CrN coatings in simulated proton exchange membrane fuel cell environments. Journal of Power Sources, 195, 12, 3814-3821, https://doi.org/10.1016/j.jpowsour.2009.12.127.
- [10] Ersöz, M. Işıtan, A. Balaban, M. (Eds) (2018). Nanotechnology 1: Fundamentals of Nanotechnology. Bilal Ofset, Denizli, Turkey.
- [11] Abdel-Karim, R., Waheed, A.F. (2013). Nanocoatings, in M. Aliofkhazraei (Ed.), Modern Surface Engineering Treatments. IntechOpen, London.
- [12] Groover, M.P. (2007). Fundamentals of Modern Manufacturing: Materials Processes, and Systems. John Wiley & Sons, New York.
Öz
In this study, the effect of nano-TiN layer obtained by PVD method on tribological behaviour of X210Cr12 (1.2080, AISI D3) cold work tool steel was investigated. Coating process was carried out by cathodic-arc PVD method using 200 V voltage, 350 °C temperature, 4x10-4 mbar pressure, and 50 A current application conditions. The characterization of the coating was carried out by FESEM and SEM-EDS analysis. The coated and uncoated samples were subjected to abrasive wear test against to 220 mesh sandpaper under 3 different loads (5, 10, and 20 N). The tests were applied at three different sliding distances (100 m, 200 m, and 600 m) keeping the sliding speed as constant at 2,6 m/s.
For uncoated samples, while the applied load increased from 5 N to 20 N, the approximate wear loss increased by 10 and 8.5 times, respectively. The approximate wear loss increased by 2.2 and 12.2 times, respectively in nano-TiN coated samples. When compared to the coated and uncoated samples, the wear loss values obtained in the coated samples at sliding distances of 100 m and 200 m differed greatly from uncoated samples, under same conditions almost 100%. However, when the sliding distance reached 600 m, the gap started to close and the gap decreased to 30%.
Anahtar Kelimeler
AISI D3 Titanium nitride Cathodic-arc PVD Films Wear resistance
Kaynakça
- [1] Bunshah, R. F., C. Weissmantel (2001). Handbook of Hard Coatings: Deposition Technologies, Properties and Applications. Noyes Publications, Norwich, New York.
- [2] Bunshah, R.F. (Ed.) (1994). Handbook of Deposition Technologies for Films and Coatings: Science, Technology, and Applications. William Andrew, LLC Norwich, New York.
- [3] Mattox D.M. (2010). Handbook of Physical Vapor Deposition (PVD) Processing. William Andrew, LLC Norwich, New York.
- [4] Bunshatta, R.F. (1980). High Rate Physical Vapour Deposition Processes, Agard Lecture Series No: 106, Material Coating Techniques. Hardford House, London.
- [5] Totten, G. E. (Ed.) (1992). ASM Handbook, Volume 18: Friction, Lubrication, and Wear Technology. ASM International, Cleveland.
- [6] Gerth, J., Wiklund, U. (2008). The İnfluence of Metallic Interlayers on the Adhesion of PVD TiN Coatings on High-Speed Steel. Wear, 264(9-10), 885-892, https://doi.org/10.1016/j.wear.2006.11.053.
- [7] Aihua, L., Jianxin, D., Haibing, C., Yangyang, Jun, C. Z. (2012). Friction and Wear Properties of TiN, TiAlN, AlTiN and CrAlN PVD Nitride Coatings. International Journal of Refractory Metals and Hard Materials, 31, 82-88. https://doi.org/10.1016/j.ijrmhm.2011.09.010.
- [8] Chavda, M.R., Dave, D.P., Chauhan, K.V., Rawal, S.K. (2016). Tribological characterization of TiN coatings prepared by sputtering. Procedia Technology, 23, 36-41. https://doi.org/10.1063/1.5032487.
- [9] Wang, L., Northwood, D.O., Nie, X., Housden, J., Spain, E., Leyland, A., Matthews, A. (2010). Corrosion properties and contact resistance of TiN, TiAlN and CrN coatings in simulated proton exchange membrane fuel cell environments. Journal of Power Sources, 195, 12, 3814-3821, https://doi.org/10.1016/j.jpowsour.2009.12.127.
- [10] Ersöz, M. Işıtan, A. Balaban, M. (Eds) (2018). Nanotechnology 1: Fundamentals of Nanotechnology. Bilal Ofset, Denizli, Turkey.
- [11] Abdel-Karim, R., Waheed, A.F. (2013). Nanocoatings, in M. Aliofkhazraei (Ed.), Modern Surface Engineering Treatments. IntechOpen, London.
- [12] Groover, M.P. (2007). Fundamentals of Modern Manufacturing: Materials Processes, and Systems. John Wiley & Sons, New York.
Ayrıntılar
| Birincil Dil | İngilizce |
|---|---|
| Konular | Makine Mühendisliği |
| Bölüm | Research Article |
| Yazarlar | |
| Yayımlanma Tarihi | 20 Mart 2022 |
| Kabul Tarihi | 3 Ağustos 2021 |
| Yayımlandığı Sayı | Yıl 2022 Cilt: 6 Sayı: 1 |
