Bu çalışmada enerji verimli düşük/sıfır karbon binalar için geliştirilen sürdürülebilir ve çevre dostu
pencere ve cam teknolojilerinin kapsamlı bir analizi sunulmaktadır. Ortalama ısı transfer katsayısı (Uvalue), güneş ısı kazanç katsayısı, görünür ışık geçirgenlik katsayısı, UV ve IR ışık bloklama kapasitesi,
termal konfor, maliyet ve ticarileşebilme potansiyeli gibi temel performans kriterleri üzerinden söz
konusu yeni nesil pencere ve cam teknolojileri incelenmekte ve konvansiyonel ürünlerle
karşılaştırılmaktadır. Pencereler bina kabuğundan gerçekleşen toplam ısı kayıplarının yaklaşık %60’ından
sorumlu olduğu için, çalışmalar çoğunlukla ısıl direnci yüksek ürün geliştirme üzerine yoğunlaşmaktadır.
Bu manada vakum cam teknolojisi oldukça iyimser sonuçlar ortaya koymaktadır. Vakum camlar 0.50
W/m2
K’in altında U değerlerine sahiptir. Bu değer hava ya da argon dolgulu çok katmanlı klasik pencere
teknolojilerinde 2.00-2.70 W/m2
K aralığındadır. Isıl dirençli fotovoltaik cam uygulamaları (TRPVG)
yaklaşık 1.19 W/m2
K’lik bir U değeri ile hem çift katmanlı camlara göre iki kat daha iyi ısıl yalıtım
ortaya koymakta hem de birim m2
’den yaklaşık 100 W elektrik üretimine imkân tanımaktadır. Low-e
camlar sert iklim koşullarında pencere orijinli ısıl kayıpların etkin minimizasyonunda anahtar rol
oynamaktadır. Aerogel camlar görsel kaliteyi etkilese de sınırlı bir et kalınlığında ortaya koyduğu
benzersiz ısıl direnç açısından farkındalık oluşturmaktadır
TÜBİTAK (The Scientific and Technological Research Council of Turkey)
216M531
Sorumlu yazar bu çalışmaya 216M531 numaralı proje kapsamında sunduğu maddi desteğinden ötürü TÜBİTAK’a teşekkürlerini sunar.
This study presents a comprehensive analysis of sustainable and environmentally friendly
window and glass technologies developed for energy efficient low / zero carbon buildings. The new
generation of window and glass technologies are examined over the basic performance criteria such as
average heat transfer coefficient (U-value), solar heat gain coefficient, visible light transmission
coefficient, thermal comfort, cost and commercialization potential. As the windows are responsible for the approximate % 60 of heat loss from the building's shell, the works are mostly concentrated on the
development of products with high thermal resistance. In this context, vacuum glass technology reveals
quite optimistic results. Vacuum glasses have U values below 0.50 W/m2
K. This value is in the range of
2.00-2.70 W/m2
K in air or argon filled multi-layered classical window technologies. Thermal resistance
photovoltaic glass applications (TRPVG) provide a U value of about 1.19 W/m2
K. And thus, it provides
twice as good thermal insulation compared to double-layer glass, and allows the production of
approximately 100 W of electricity per m2
. Low-e glasses play a key role in the efficient minimization of
window-based thermal losses in harsh climatic conditions. Although aerogel glasses affect visual quality,
it is a very impressive technology because it offers a unique thermal resistance at a limited wall thickness.
216M531
Primary Language | Turkish |
---|---|
Subjects | Engineering |
Journal Section | Survey Articles |
Authors | |
Project Number | 216M531 |
Publication Date | December 31, 2019 |
Submission Date | May 9, 2019 |
Acceptance Date | September 27, 2019 |
Published in Issue | Year 2019 Volume: 24 Issue: 3 |
Announcements:
30.03.2021-Beginning with our April 2021 (26/1) issue, in accordance with the new criteria of TR-Dizin, the Declaration of Conflict of Interest and the Declaration of Author Contribution forms fulfilled and signed by all authors are required as well as the Copyright form during the initial submission of the manuscript. Furthermore two new sections, i.e. ‘Conflict of Interest’ and ‘Author Contribution’, should be added to the manuscript. Links of those forms that should be submitted with the initial manuscript can be found in our 'Author Guidelines' and 'Submission Procedure' pages. The manuscript template is also updated. For articles reviewed and accepted for publication in our 2021 and ongoing issues and for articles currently under review process, those forms should also be fulfilled, signed and uploaded to the system by authors.