Research Article
BibTex RIS Cite

An Investigation of the Influence of Various Shaped Cutouts on the Free Vibration Behavior of Sandwich Structures

Year 2022, Volume: 26 Issue: 4, 687 - 694, 31.08.2022
https://doi.org/10.16984/saufenbilder.1063422

Abstract

The current study deals with free vibration analysis of a sandwich beam in presence of different cutouts. PVC foam and glass fiber were used for the core and surface layers of the sandwich structures, respectively. First 6 frequencies of the sandwich structures were determined for different cutout shapes to see the effect of cutout shapes on the free vibration behavior of sandwich structures. For this, sandwich beams with different cutout shapes but with the same area were modeled. To see the effect of cutouts-shape only the shape of cutouts was changed and all other parameters were kept unchanged. Analyses were performed by using ANSYS apdl commercially available software. The analysis gives information about the influence of the cutout shape on the first six natural frequencies of the sandwich structures. From the results, it was observed that the changes of cutout shapes caused a significant decrease or increase in natural frequencies of sandwich structures beam depending on the cutout shape.

References

  • [1] C. Wick, Tool and Manufacturing Engineers Handbook: Materials, Finishing, and Coating, vol. 3. 1985.
  • [2] K. N. Shivakumar, Argade, S. D., Sadler, R. L., Sharpe, M. M., Dunn, L., Swaminathan, G., & Sorathia, U. “Processing and properties of a lightweight fire resistant core material for sandwich structures,” Journal of Advanced Materials vol. 38, no. 1, pp. 32–38, 2006.
  • [3] C. Chen, A. M. Harte, N. A. Fleck, “Plastic collapse of sandwich beams with a metallic foam core,” International Journal of Mechanical Sciences, vol. 43, no. 6, pp. 1483–1506, 2001.
  • [4] A. Shahdin, L. Mezeix, C. Bouvet, J. Morlier, Y. Gourinat, “Fabrication and mechanical testing of glass fiber entangled sandwich beams: A comparison with honeycomb and foam sandwich beams,” Composite. Structures., vol. 90, no. 4, pp. 404–412, 2009.
  • [5] N. Mishra, B. Basa, S. K. Sarangi, “Free vibration Analysis of Sandwich Plates with cutout,” IOP Conference Series: Materials Science and Engineering, vol. 149, no. 1, 2016.
  • [6] H. K. Bhardwaj, J. Vimal, A. K. Sharma, “Study of Free Vibration Analysis of Laminated Composite Plates with Skew Cut-outs based on FSD,” Journal of Civil Engineering and Environmental Technology, vol. 1, no. 1, pp. 71–75, 2014.
  • [7] S. Ramakrishna, K. M. Rao, and N. S. Rao, “Free vibration analysis of laminates with circular cutout by hybrid-stress finite element,” Composite. Structure., vol. 21, no. 3, pp. 177–185, 1992.
  • [8] S. Chikkol Venkateshappa, P. Kumar, T. Ekbote, “Free vibration studies on plates with central cut-out,” CEAS Aeronaut. Journal., vol. 10, no. 2, pp. 623–632, 2019.
  • [9] H. K. Bhardwaj, J. Vimal, A. K. Sharma, “Study of Free Vibration Analysis of Laminated Composite Plates with Skew Cut-outs based on FSDT,” Journal of Civil Engineering and Environmental Technology., vol. 1, no. 1, pp. 71–75, 2014.
  • [10] J. Vimal, R. K. Srivastava, A. D. Bhatt, A. K. Sharma, “Free vibration analysis of functionally graded skew plates with circular cutouts,” International Journal of Engineering, Science and Technology., vol. 6, no. 3, 2014.
  • [11] J. Vimal, R. K. Srivastava, A. D. Bhatt, A. K. Sharma, “Free vibration analysis of moderately thick functionally graded plates with multiple circular and square cutouts using finite element method,” Journal of Solid Mechanics, vol. 7, no. 1, pp. 83–95, 2015.
  • [12] Maharudra, B. Arya, T. Rajanna, “Effect of trapezoidal shaped laminated composite plate with and without cutout on vibration characteristics,” Materials Today: Proceedings, vol. 45, pp. 34–40, 2020.
  • [13] S. Dey, T. Mukhopadhyay, S. K. Sahu, S. Adhikari, “Effect of cutout on stochastic natural frequency of composite curved panels,” Composites Part B: Engineering., vol. 105, pp. 188–202, 2016.
  • [14] V. N. Van Do, C. H. Lee, “Free vibration analysis of FGM plates with complex cutouts by using quasi-3D isogeometric approach,” International Journal of Mechanical Sciences., vol. 159, pp. 213–233, 2019.
  • [15] P. Pushparaj, B. Suresha, “Free vibration analysis of laminated composite plates using finite element method,” Polymers and Polymer Composites, vol. 24, no. 7, pp. 529–538, 2016.
  • [16] D. Bhatt, Y. Mishra, D. P. K. Sharma, “Model Analysis of Centre Circular Cutout of Laminated Composite Plate and Square Skew Plate by using FEM,” vol. 3, no. 11, pp. 8–16, 2014.
  • [17] S. Mondal, A. K. Patra, S. Chakraborty, N. Mitra, “Dynamic performance of sandwich composite plates with circular hole/cut-out: A mixed experimental-numerical study,” Composite. Structures., vol. 131, no. April 2016, pp. 479–489, 2015.
  • [18] M. S. H. Al-araji, A. S. Gafer, R. S. Saed, “Vibration Analysis of Perforated Composite Sandwich Plate,” Journal of University of Babylon for Engineering Sciences., vol. 26, no. 26, pp. 166–178, 2018.
Year 2022, Volume: 26 Issue: 4, 687 - 694, 31.08.2022
https://doi.org/10.16984/saufenbilder.1063422

Abstract

Supporting Institution

destekleyen kurum yoktur

References

  • [1] C. Wick, Tool and Manufacturing Engineers Handbook: Materials, Finishing, and Coating, vol. 3. 1985.
  • [2] K. N. Shivakumar, Argade, S. D., Sadler, R. L., Sharpe, M. M., Dunn, L., Swaminathan, G., & Sorathia, U. “Processing and properties of a lightweight fire resistant core material for sandwich structures,” Journal of Advanced Materials vol. 38, no. 1, pp. 32–38, 2006.
  • [3] C. Chen, A. M. Harte, N. A. Fleck, “Plastic collapse of sandwich beams with a metallic foam core,” International Journal of Mechanical Sciences, vol. 43, no. 6, pp. 1483–1506, 2001.
  • [4] A. Shahdin, L. Mezeix, C. Bouvet, J. Morlier, Y. Gourinat, “Fabrication and mechanical testing of glass fiber entangled sandwich beams: A comparison with honeycomb and foam sandwich beams,” Composite. Structures., vol. 90, no. 4, pp. 404–412, 2009.
  • [5] N. Mishra, B. Basa, S. K. Sarangi, “Free vibration Analysis of Sandwich Plates with cutout,” IOP Conference Series: Materials Science and Engineering, vol. 149, no. 1, 2016.
  • [6] H. K. Bhardwaj, J. Vimal, A. K. Sharma, “Study of Free Vibration Analysis of Laminated Composite Plates with Skew Cut-outs based on FSD,” Journal of Civil Engineering and Environmental Technology, vol. 1, no. 1, pp. 71–75, 2014.
  • [7] S. Ramakrishna, K. M. Rao, and N. S. Rao, “Free vibration analysis of laminates with circular cutout by hybrid-stress finite element,” Composite. Structure., vol. 21, no. 3, pp. 177–185, 1992.
  • [8] S. Chikkol Venkateshappa, P. Kumar, T. Ekbote, “Free vibration studies on plates with central cut-out,” CEAS Aeronaut. Journal., vol. 10, no. 2, pp. 623–632, 2019.
  • [9] H. K. Bhardwaj, J. Vimal, A. K. Sharma, “Study of Free Vibration Analysis of Laminated Composite Plates with Skew Cut-outs based on FSDT,” Journal of Civil Engineering and Environmental Technology., vol. 1, no. 1, pp. 71–75, 2014.
  • [10] J. Vimal, R. K. Srivastava, A. D. Bhatt, A. K. Sharma, “Free vibration analysis of functionally graded skew plates with circular cutouts,” International Journal of Engineering, Science and Technology., vol. 6, no. 3, 2014.
  • [11] J. Vimal, R. K. Srivastava, A. D. Bhatt, A. K. Sharma, “Free vibration analysis of moderately thick functionally graded plates with multiple circular and square cutouts using finite element method,” Journal of Solid Mechanics, vol. 7, no. 1, pp. 83–95, 2015.
  • [12] Maharudra, B. Arya, T. Rajanna, “Effect of trapezoidal shaped laminated composite plate with and without cutout on vibration characteristics,” Materials Today: Proceedings, vol. 45, pp. 34–40, 2020.
  • [13] S. Dey, T. Mukhopadhyay, S. K. Sahu, S. Adhikari, “Effect of cutout on stochastic natural frequency of composite curved panels,” Composites Part B: Engineering., vol. 105, pp. 188–202, 2016.
  • [14] V. N. Van Do, C. H. Lee, “Free vibration analysis of FGM plates with complex cutouts by using quasi-3D isogeometric approach,” International Journal of Mechanical Sciences., vol. 159, pp. 213–233, 2019.
  • [15] P. Pushparaj, B. Suresha, “Free vibration analysis of laminated composite plates using finite element method,” Polymers and Polymer Composites, vol. 24, no. 7, pp. 529–538, 2016.
  • [16] D. Bhatt, Y. Mishra, D. P. K. Sharma, “Model Analysis of Centre Circular Cutout of Laminated Composite Plate and Square Skew Plate by using FEM,” vol. 3, no. 11, pp. 8–16, 2014.
  • [17] S. Mondal, A. K. Patra, S. Chakraborty, N. Mitra, “Dynamic performance of sandwich composite plates with circular hole/cut-out: A mixed experimental-numerical study,” Composite. Structures., vol. 131, no. April 2016, pp. 479–489, 2015.
  • [18] M. S. H. Al-araji, A. S. Gafer, R. S. Saed, “Vibration Analysis of Perforated Composite Sandwich Plate,” Journal of University of Babylon for Engineering Sciences., vol. 26, no. 26, pp. 166–178, 2018.
There are 18 citations in total.

Details

Primary Language English
Subjects Mechanical Engineering
Journal Section Research Articles
Authors

Ufuk Demircioğlu 0000-0002-9707-8271

Mutlu Tarık Çakır 0000-0002-0107-594X

Publication Date August 31, 2022
Submission Date January 26, 2022
Acceptance Date May 30, 2022
Published in Issue Year 2022 Volume: 26 Issue: 4

Cite

APA Demircioğlu, U., & Çakır, M. T. (2022). An Investigation of the Influence of Various Shaped Cutouts on the Free Vibration Behavior of Sandwich Structures. Sakarya University Journal of Science, 26(4), 687-694. https://doi.org/10.16984/saufenbilder.1063422
AMA Demircioğlu U, Çakır MT. An Investigation of the Influence of Various Shaped Cutouts on the Free Vibration Behavior of Sandwich Structures. SAUJS. August 2022;26(4):687-694. doi:10.16984/saufenbilder.1063422
Chicago Demircioğlu, Ufuk, and Mutlu Tarık Çakır. “An Investigation of the Influence of Various Shaped Cutouts on the Free Vibration Behavior of Sandwich Structures”. Sakarya University Journal of Science 26, no. 4 (August 2022): 687-94. https://doi.org/10.16984/saufenbilder.1063422.
EndNote Demircioğlu U, Çakır MT (August 1, 2022) An Investigation of the Influence of Various Shaped Cutouts on the Free Vibration Behavior of Sandwich Structures. Sakarya University Journal of Science 26 4 687–694.
IEEE U. Demircioğlu and M. T. Çakır, “An Investigation of the Influence of Various Shaped Cutouts on the Free Vibration Behavior of Sandwich Structures”, SAUJS, vol. 26, no. 4, pp. 687–694, 2022, doi: 10.16984/saufenbilder.1063422.
ISNAD Demircioğlu, Ufuk - Çakır, Mutlu Tarık. “An Investigation of the Influence of Various Shaped Cutouts on the Free Vibration Behavior of Sandwich Structures”. Sakarya University Journal of Science 26/4 (August 2022), 687-694. https://doi.org/10.16984/saufenbilder.1063422.
JAMA Demircioğlu U, Çakır MT. An Investigation of the Influence of Various Shaped Cutouts on the Free Vibration Behavior of Sandwich Structures. SAUJS. 2022;26:687–694.
MLA Demircioğlu, Ufuk and Mutlu Tarık Çakır. “An Investigation of the Influence of Various Shaped Cutouts on the Free Vibration Behavior of Sandwich Structures”. Sakarya University Journal of Science, vol. 26, no. 4, 2022, pp. 687-94, doi:10.16984/saufenbilder.1063422.
Vancouver Demircioğlu U, Çakır MT. An Investigation of the Influence of Various Shaped Cutouts on the Free Vibration Behavior of Sandwich Structures. SAUJS. 2022;26(4):687-94.