Research Article
Year 2022,
Volume: 9 Issue: 2, 38 - 44, 30.06.2022
Abstract
References
- Praveena, V., Karthikeyan, R., and Eswaraiah, D. 2019. Performance evaluation of heat exchanger shell and tube with distinct fin configurations. AIP Conference Proceedings, 2200(1), 020061-1–020061-13.
- Ben Slimene, M., Poncet, S., Bessrour, J., and Kallel, F. 2022. Numerical investigation of the flow dynamics and heat transfer in a rectangular shell-and-tube heat exchanger. Case Studies in Thermal Engineering, 32, 101873.
- Okbaz, A., Pınarbaşı, A., Olcay, A. B., & Aksoy, M. H. 2018. An experimental, computational and flow visualization study on the air-side thermal and hydraulic performance of louvered fin and round tube heat exchangers. International Journal of heat and mass transfer, 121, 153-169.
- Kumar, H.K., Nagaraj, P., and Uday, R.H. 2016. Design Optimization of a Shell and Tube Heat Exchanger. MAE 598 Design Optimization, Arizona State University.
- Chowdhury, F., Espinel, A., Moreira, M.J.J., and Mediavilla, L. 2019. Heat Exchanger design & optimization tool. IME 0401 Heat Transfer, Universidad San Francisco de Quito.
- Patel, V.K. and Rao, R.V. 2010. Design optimization of shell-and-tube heat exchanger using particle swarm optimization technique. Applied Thermal Engineering, 30(11-12), 1417-1425.
- Selbaş, R., Kızılkan, Ö., and Reppich, M. 2006. A new design approach for shell-and-tube heat exchangers using genetic algorithms from economic point of view. Chemical Engineering and Processing: Process Intensification, 45(4), 268-275.
- Turgut, O.E., Turgut, M.S., and Coban, M.T. 2014. Design and economic investigation of shell and tube heat exchangers using Improved Intelligent Tuned Harmony Search algorithm. Ain Shams Engineering Journal, 5(4), 1215-1231.
- Raja, B.D. and Jhala, R.L. 2016. Optimization of Shell and Tube Heat Exchangers using Teaching-Learning based Optimization Algorithm. International Journal of Engineering Research & Technology (IJERT), 4(10), 1-5.
- Hanafi, M.F.I.M., Bahreininejad, A., and Uddin, N. 2021. Optimization of shell and tube heat exchanger using the water cycle algorithm. IOP Conference Series: Materials Science and Engineering, 1173(1), 012005.
- Sai, J.P. and Rao, B.N. 2022. Non-dominated Sorting Genetic Algorithm II and Particle Swarm Optimization for design optimization of Shell and Tube Heat Exchanger. International Communications in Heat and Mass Transfer, 132, 105896.
- Pham, D.T., Ghanbarzadeh, A., Koç, E., Otri, S., Rahim, S., and Zaidi, M. 2006. The bees algorithm—a novel tool for complex optimisation problems. Intelligent Production Machines and Systems, 454-459.
- Pham, D. and Kalyoncu, M. 2009. Optimisation of a fuzzy logic controller for a flexible single-link robot arm using the Bees Algorithm. in 2009 7th IEEE International Conference on Industrial Informatics. 23-26 June. Cardiff, UK.
- Fahmy, A., Kalyoncu, M., and Castellani, M. 2012. Automatic design of control systems for robot manipulators using the bees algorithm. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 226(4), 497-508.
- Eser, O., Çakan, A., Kalyoncu, M., and Botsalı, F.M. 2021. Arı Algoritması (AA) ve Parçacık Sürü Optimizasyonu (PSO) Kullanarak Çeyrek Araç Modeli Tasarım Parametrelerinin Belirlenmesi. Konya Mühendislik Bilimleri Dergisi, 9(3), 621-632.
- Zarea, H., Rastitalab, A., and Kashkooli, F.M. 2016. Economic design of shell-and-tube heat exchangers using Bees Algorithm. in 2nd International Conference on Research in Engineering, Science and Technology (REST), 21 February. Dubai, UAE.
- Kern, D.Q., Process heat transfer. First Edition, McGraw-Hill College, New York, 1950.
- Bozorgan, N., Ghafouri, A., Assareh, E., and Mohammad, S.A.S. 2021. Design and thermal-hydraulic optimization of a shell and tube heat exchanger using bees algorithm. Thermal Science, 26(1B), 693-703.
Determining the design parameters for manufacturing a shell and tube heat exchanger with minimum cost using The Bees Algorithm
Abstract
The shell and tube heat exchanger is one of the commonly used heat exchangers. Minimizing the cost required to manufacture these heat exchangers is one of the main objectives for designers and users. This study determined the necessary design parameters for a shell and tube heat exchanger to be manufactured with minimum cost using The Bees Algorithm (BA). These design parameters are the shell side inside diameter, the tube side outside diameter, and the baffle spaces. The system mathematical model is created to find the optimum values of these parameters, the necessary boundary conditions are determined, and an optimization study is carried out. The cost obtained by BA $ 11187.86 compared with GA $ 11190.17 and SPQ $ 18429.4 from the literature. It is observed that The Bees Algorithm (BA) gives successful results in the design of shell and tube heat exchangers.
Keywords
Design optimization Mathematical Modelling Heat transfer Shell and tube heat exchanger The Bees Algorithm
References
- Praveena, V., Karthikeyan, R., and Eswaraiah, D. 2019. Performance evaluation of heat exchanger shell and tube with distinct fin configurations. AIP Conference Proceedings, 2200(1), 020061-1–020061-13.
- Ben Slimene, M., Poncet, S., Bessrour, J., and Kallel, F. 2022. Numerical investigation of the flow dynamics and heat transfer in a rectangular shell-and-tube heat exchanger. Case Studies in Thermal Engineering, 32, 101873.
- Okbaz, A., Pınarbaşı, A., Olcay, A. B., & Aksoy, M. H. 2018. An experimental, computational and flow visualization study on the air-side thermal and hydraulic performance of louvered fin and round tube heat exchangers. International Journal of heat and mass transfer, 121, 153-169.
- Kumar, H.K., Nagaraj, P., and Uday, R.H. 2016. Design Optimization of a Shell and Tube Heat Exchanger. MAE 598 Design Optimization, Arizona State University.
- Chowdhury, F., Espinel, A., Moreira, M.J.J., and Mediavilla, L. 2019. Heat Exchanger design & optimization tool. IME 0401 Heat Transfer, Universidad San Francisco de Quito.
- Patel, V.K. and Rao, R.V. 2010. Design optimization of shell-and-tube heat exchanger using particle swarm optimization technique. Applied Thermal Engineering, 30(11-12), 1417-1425.
- Selbaş, R., Kızılkan, Ö., and Reppich, M. 2006. A new design approach for shell-and-tube heat exchangers using genetic algorithms from economic point of view. Chemical Engineering and Processing: Process Intensification, 45(4), 268-275.
- Turgut, O.E., Turgut, M.S., and Coban, M.T. 2014. Design and economic investigation of shell and tube heat exchangers using Improved Intelligent Tuned Harmony Search algorithm. Ain Shams Engineering Journal, 5(4), 1215-1231.
- Raja, B.D. and Jhala, R.L. 2016. Optimization of Shell and Tube Heat Exchangers using Teaching-Learning based Optimization Algorithm. International Journal of Engineering Research & Technology (IJERT), 4(10), 1-5.
- Hanafi, M.F.I.M., Bahreininejad, A., and Uddin, N. 2021. Optimization of shell and tube heat exchanger using the water cycle algorithm. IOP Conference Series: Materials Science and Engineering, 1173(1), 012005.
- Sai, J.P. and Rao, B.N. 2022. Non-dominated Sorting Genetic Algorithm II and Particle Swarm Optimization for design optimization of Shell and Tube Heat Exchanger. International Communications in Heat and Mass Transfer, 132, 105896.
- Pham, D.T., Ghanbarzadeh, A., Koç, E., Otri, S., Rahim, S., and Zaidi, M. 2006. The bees algorithm—a novel tool for complex optimisation problems. Intelligent Production Machines and Systems, 454-459.
- Pham, D. and Kalyoncu, M. 2009. Optimisation of a fuzzy logic controller for a flexible single-link robot arm using the Bees Algorithm. in 2009 7th IEEE International Conference on Industrial Informatics. 23-26 June. Cardiff, UK.
- Fahmy, A., Kalyoncu, M., and Castellani, M. 2012. Automatic design of control systems for robot manipulators using the bees algorithm. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 226(4), 497-508.
- Eser, O., Çakan, A., Kalyoncu, M., and Botsalı, F.M. 2021. Arı Algoritması (AA) ve Parçacık Sürü Optimizasyonu (PSO) Kullanarak Çeyrek Araç Modeli Tasarım Parametrelerinin Belirlenmesi. Konya Mühendislik Bilimleri Dergisi, 9(3), 621-632.
- Zarea, H., Rastitalab, A., and Kashkooli, F.M. 2016. Economic design of shell-and-tube heat exchangers using Bees Algorithm. in 2nd International Conference on Research in Engineering, Science and Technology (REST), 21 February. Dubai, UAE.
- Kern, D.Q., Process heat transfer. First Edition, McGraw-Hill College, New York, 1950.
- Bozorgan, N., Ghafouri, A., Assareh, E., and Mohammad, S.A.S. 2021. Design and thermal-hydraulic optimization of a shell and tube heat exchanger using bees algorithm. Thermal Science, 26(1B), 693-703.
There are 18 citations in total.
Details
| Primary Language | English |
|---|---|
| Subjects | Mechanical Engineering |
| Journal Section | Research Article |
| Authors | |
| Publication Date | June 30, 2022 |
| Submission Date | April 11, 2022 |
| Acceptance Date | June 2, 2022 |
| Published in Issue | Year 2022 Volume: 9 Issue: 2 |
