Bu çalışmada demiryolu araçları sektöründe özellikle hızlı tren gövde ve şasilerinin imalatında kullanılan AW 6061 T6 serisi alüminyum alaşımları MIG (metal inert gaz) kaynak yöntemi ile birleştirilmiştir. Çalışma kapsamındaki tüm numunelere PA (kaynak torcunun iş parçasına olan açısı 900 konumda yapılan kaynak) pozisyonunda BW (alın birleştirme) uygulanmış ve birleştirme işlemlerinde 150x300x3 mm ebatlarında plakalar kullanılmıştır. Mukavemet değerlerinin kıyaslanabilmesi için kaynaklı numunelere çekme testi, çentik darbe testi, sertlik testi uygulanmış, birleştirme bölgeleri makrografi ve mikrografi muayene ile incelenmiştir.
In this study, AW 6061 T6 series aluminum alloys, which are used in the railway vehicles industry, especially in the manufacturing of high-speed train bodies and chassis, were combined with the MIG (metal inert gas) welding method. BW (butt joint) was applied to all samples within the scope of the study in the PA position (welding performed at 900 angle of the welding torch to the workpiece) and plates with dimensions of 150x300x3 mm were used in the joining processes. In order to compare the strength values, tensile test, notch impact test and hardness test were applied to the welded samples, and the joint areas were examined by macrography and micrography examination.
Primary Language | Turkish |
---|---|
Subjects | Resource Technologies, Metals and Alloy Materials |
Journal Section | Article |
Authors | |
Publication Date | January 31, 2024 |
Submission Date | December 3, 2023 |
Acceptance Date | January 6, 2024 |
Published in Issue | Year 2024 Issue: 19 |